Badger Laboratories & Engineering Co., Inc., located in Neenah, Wisc., is a full-service environmental lab offering engineering and field services in addition to laboratory analysis. Services offered by Badger Labs include industrial wastewater monitoring, sewer and storm water flow monitoring, hazardous waste sampling, groundwater monitoring, and air emissions monitoring.
According to Rick Larson, a project manager at Badger Labs with 20 years of experience, his company has contracts with a number of municipalities in Wisconsin to monitor and analyze the wastewater discharge from industries located within these cities. Badger Labs also has contracts with individual industrial facilities to monitor their discharges.
Badger Labs conducts monitoring at a wide variety of industries, including pulp mills, meat packing plants, metal platers, food processors, soft drink bottlers, truck manufacturers, and electronics manufacturers. At each facility, a one to three day monitoring program is conducted on a monthly, quarterly, or semi-annual basis. In addition to flow measurement, a 24-hour flow-proportional composite sample is collected each day. Samples from most industries are analyzed for BOD, suspended solids, pH, and phosphorus, while samples from facilities such as metal platers are also analyzed for cadmium, chromium, copper, lead, mercury, nickel, silver and zinc.
For the past five years, Isco Flow Metering Inserts have been a vital part of the monitoring programs conducted by Badger Labs. Isco Flow Metering Inserts provide a quick and accurate means of measuring and recording flow in round sewer pipes. Their patented design allows the metering inserts to be installed from ground level, eliminating the costs and hazards of entering manholes.
The metering inserts are designed to be used with Isco bubbler flowmeters, and are ideal for short-term (a few hours) or long-term (several weeks) flow measurement studies. Larson uses the inserts with Isco 3230 and 4230 Bubbler Flowmeters, and with a 730 Bubbler Flow Module plugged into an Isco 6700 Sampler.
Isco Flow Metering Inserts allow flow rates to be accurately measured in 6 in., 8 in., 10 in., and 12 in. diameter pipes in manholes up to 16 ft. deep. Tested and calibrated by St. Anthony Falls Hydraulic Laboratory at the University of Minnesota, the metering inserts provide accurate measurement from 1 gpm to 640 gpm
Isco Flow Metering Inserts are constructed of durable, corrosion resistant aluminum and plastic. A complete system consists of a metering insert and interlocking pole sections. Each metering insert includes an integral round orifice for measuring higher flow rates. An attachable 60° V-notch weir plate provides higher accuracy at lower flow rates.
The metering insert is first connected to the flowmeter, the bubble rate is adjusted to about one bubble per second, and the level reading on the flowmeter is set to zero. The interlocking pole sections and the metering insert are lowered into the manhole and positioned in the upstream pipe.
The rubber bladder on the metering insert is then inflated using the hand air pump to seal and secure the insert in place. The flow meter is then suspended in the manhole, and the manhole cover is replaced. The flowmeter then measures and records flow in the sewer.
When the monitoring project is completed, removing the insert is just as easy. The bladder is first deflated, and the pole is used to lift the metering insert to ground level. The metering insert then can be quickly disassembled for storage or transportation between monitoring sites.
In conclusion, Larson said that Isco Flow Metering Inserts "have been a real help to us," offering three distinct advantages: