Abandoned water wells may be the pathway for surface contamination into drinking water aquifers
Household water well owners should act to address any improperly abandoned wells on their properties, as they can present threats to both people and animals, the National Ground Water Assn. (NGWA) said.
"Abandoned wells can be a physical danger to people and animals who may fall into them, but an even greater threat may be the pathway that an abandoned well provides for surface contamination into an aquifer used for drinking water," said Cliff Treyens, NGWA's public awareness director.
It is estimated that there are millions of abandoned wells and drilled holes in the U.S.
Other types of wells and drilled holes may also affect aquifers, such as ones used for:
- Mineral exploration;
- Seismic data collection;
- Construction water; and
- Groundwater monitoring.
Finding abandoned wells or other drilled holes may take some detective work on the part of the property owner.
"The passage of years can obscure what was once obviously a well. If a person knows what to look for, however, there are some signs that can give away the location of an abandoned well," Treyens said. The signs include:
- Pipe sticking out of the ground;
- Small buildings that may have been well houses;
- Depressions in the ground;
- The presence of concrete vaults or pits; and
- Out-of-use windmills.
Other clues to abandoned wells or boreholes can come from old maps, property plans or other documents; neighbors who have been in the area for a long time; and additions to homes or property that may have covered up an abandoned well.
If an abandoned well or borehole is found, the property owner should contact a qualified water well system professional. If the contractor determines the well or hole needs to be plugged, the process may begin by removing all materials such as pump parts, pitless adaptors, pipe, wire, well screens, gravel and other particulates at the bottom of the well.
Once the borehole is properly prepared — including possible disinfection of the well — the contractor can use specialized grout to fill the well from the bottom up to prevent surface water contamination from infiltrating the well.
The cost of well plugging or "decommissioning" a well or borehole can vary. In Iowa, for instance, plugging drilled household wells ranges from $600 for shallow, easily accessible wells, to more than $3,000 for wells greater than 500 ft in depth. The width of the well also may affect the price.The property owner is generally liable for paying decommissioning costs.
Some states have programs that will help pay the cost of water well plugging. To check on your state, visit www.wellowner.org , then click on Water Well Basics/Well Construction Agencies.