This is the last of a series of three articles covering bottling water: Bottled Water Testing, Source Development, and Licensing and Labeling
How to Start A Bottled Water Company
Starting a bottled water company follows clear steps. The following series of three bottling water articles will guide you through bottled water testing, source development, and licensing and labeling.
This is the first in a series of three bottling water articles. Learn more:
The Food and Drug Administration (FDA) regulates bottled water. FDA regulations for bottling water include Good Manufacturing Practices (GMPs), standards of identity and labeling requirements.
These regulations are posted in the Code of Federal Register and are enforced at the state level.
The following is to give a brief overview of information that regulators may request for bottled water licensing and labeling requirements.
Licensing and Applications for Bottling Water
In order to sell bottled water in the United States, bottlers must meet FDA regulations as well as additional regulatory requirements of the states in which their finished product is sold. While some states only focus on regulating bottled water produced in their state, 26 states currently require some sort of application process for out-of-state bottlers as well. The amount of information required for submission varies from state to state and can include
- A formal application
- Source hydrogeological and engineering reports (if the source is not from a municipality)
- Source water and finished product analysis results
- Engineering reports, drawings and pictures of the bottling plant
- Samples of bottles, caps and labels
- Copies of inspection permits and/or licenses issued by the state in which the plant is located
- Bottling plant Standard Operating Procedures (SOPs) and/or Hazard Analysis Critical Control Points (HAACP) documents
- Contaminated product recall plan
In addition to the required information, many states impose licensing fees. The fees imposed vary greatly from no licensing fee for bottlers selling in Georgia to an initial licensing fee of $1,100 for bottlers wishing to sell product in New Jersey. While the state of New York currently does not have a bottling water fee, bottlers wishing to sell in New York City will need to pay a fee of $695. (New York City is the only city in the U.S. that has its own bottling water licensing program.)
The time it takes to get licensed varies greatly from a couple of weeks to more than six months depending on the state and bottler. Some states such as New York are very specific about the type of information they require and closely scrutinize every application. Bottlers will be required to make modifications and/or submit new information if they fail to provide all of the proper documentation, or if the plants are not designed or configured in a manner to meet the state’s regulations. The most cost-effective and time-saving method to obtain licenses is to contact very early in the process the regulators of each state in which the product will be sold to discuss their regulatory requirements. It is much easier to change a blueprint design prior to building the plant and installing the equipment than to try to correct deficiencies in these areas later.
Labeling Process for a Bottled Water Company
Many new bottled water companies make the mistake of spending a lot of money on the design and printing of their bottled water labels only to find out that they cannot use them because they do not comply with FDA or state regulations. These mistakes also can be avoided by careful attention to FDA labeling requirements and any special labeling requirements of states in which the bottler wants to be licensed.
FDA regulations for bottled water labeling include the following.
- Principal display and information panels should be large enough to accommodate all the mandatory labeling information and meet minimum size requirements.
- The statement of identity (i.e., type of water: spring, drinking, purified, etc.) should be printed prominently and conspicuously on the principal display panel.
- An ingredient list must be included if minerals including fluoride are added.
- The label must contain the name and place of business of the manufacturer, packer or distributor.
- The label should include the serving size (typically defined as 8 oz.) and the number of servings in the container.
- The net quantity of contents, in terms of weight, measure or numerical count should appear in the bottom 30% of the principal panel in the proper font size.
- Nutrition labels need to appear on labels making nutritional claims such as sodium-free. (Nutrition label regulations are very specific regarding font type, size and layout.)
- No claim regarding the term "healthy" may be used or implied unless the water contains at least 10 percent of the reference daily intake (RDI) per serving size of vitamin A, vitamin C, calcium, iron, protein or fiber and meets all other low-fat, sodium and cholesterol requirements.
States may have their own bottling water labeling requirements in addition to those of the FDA. Some states require identification and location of the source as well as bottle deposit and return information. States such as Connecticut and New York even require the bottlers’ license number to appear on the bottle, which means that no labels can be printed for product to be distributed to that state until the application has been approved.
Obtaining licenses for bottling water in multiple states can be an expensive, confusing and time consuming process. However, no product should be distributed in a state without proper approval. Regulators are unsympathetic toward bottlers whose products are found in their state without proper licensing. Having a well-developed marketing plan on initial states to be targeted for distribution and gathering information up front on the licensing and labeling regulations of those states can save time, money and frustration in the end.