Researchers develop easy-to-use PFAS sensor

Nov. 9, 2023
An on-site, easy-to-use fluorescence sensor developed by MIT researchers can detect PFAS on-site in drinking water samples to the parts per billion level.

Researchers from the Massachusetts Institute of Technology have introduced a new method for an economical, easy-to-use fluorescence sensor for sensitive on-site testing of per- and polyfluoroalkyl substances (PFAS) in water samples, according to a press release from Wiley.

The testing method can detect PFAS to the µg/L, or parts per billion, level. This makes it effective for on-site detection of PFAS in highly contaminated water.

The term PFAS refers to a group of organic compounds in which most or all the hydrogen atoms bound to the carbon atoms have been replaced with fluorine atoms. They are used to provide water-, oil-, and dirt-resistance to a variety of products, such as nonstick pans, outdoor clothing, and packaging. They may also be found in fire-suppressing foam, paint, and car polish. These compounds are highly useful—and highly dangerous when they find their way into the environment: they do not break down and thus become concentrated in plants, animals, and people.

PFAS, a family of highly fluorinated substances, represent a danger for humans and the environment. Particularly problematic members of this family, such as perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) appear to cause organ damage and cancer, as well as disrupting the endocrine system. In the journal Angewandte Chemie, researchers have now introduced a new method for an economical, easy-to-use fluorescence sensor for sensitive on-site testing for PFAS in water samples.

The European Union has set drinking water limits of 100 ng/l for individual specific PFAS substances and 500 ng/L for the total of all PFAS. In Germany, water providers must begin testing drinking water for PFAS in 2026. The U.S. Environmental Protection Agency has set stricter limits: for the most widespread PFAS (PFOS and PFOA), the upper limit is set at 4 ng/L for each substance.

The usual method used to detect such trace amounts involves chromatography and mass spectrometry. These methods are time-consuming and expensive, and require complex equipment and experienced personnel.

Timothy M. Swager and Alberto Concellón at the Massachusetts Institute of Technology (MIT) in Cambridge, USA, have now introduced a technique for making a portable, inexpensive test that uses fluorescence measurements to easily and selectively detect PFAS in water samples.

The test is based on a polymer — in the form of a thin film or nanoparticles — with fluorinated sidechains that have fluorinated dye molecules (squaraine derivatives) embedded in them. The special polymer backbone (poly-phenylene ethynylene) absorbs violet light and transfers the light energy to the dye by an electron exchange (Dexter mechanism). The dye then fluoresces red.

If PFAS are present in the sample, they enter the polymer and displace the dye molecules by a fraction of a nanometer. This is enough to stop the electron exchange and thus the energy transfer. The dye’s red fluorescence is “switched off”, while the blue fluorescence of the polymer is “switched on”. The degree of fluorescence change is proportional to the concentration of PFAS.

This new technique, which has a detection limit in the µg/L range for PFOA and PFOS, is suitable for on-site detection in highly contaminated regions. Detection of trace amounts of these contaminants in drinking water can be achieved with sufficient precision after pre-concentration of the samples by solid-phase extraction.

Photo 3479035 © Péter Gudella |
Dreamstime Xxl 3479035
Photo 49090604 © Yeuperng |
Dreamstime Xxl 49090604
Photo 29724172 © Luchschen |
Dreamstime Xs 29724172
Photo 30865364 © Luchschen |
Dreamstime Xxl 30865364 (1)